| 型号 | Model | ZX-130 | |||
| 射胶系统 | Injection unit | 单位 Unit | A | B | C |
| 射胶系统 Injection unit | |||||
| 螺杆直径 | Screw diameter | mm | 36 | 40 | 45 |
| 螺杆长径L/D | Screw L/D ratio | - | 22.2 | 20 | 17.8 |
| 理论射胶容积 | Theoretical shot volume | cm2 | 204 | 251 | 318 |
| 射胶重量(PS) | Shot weight (PS) | g | 187 | 231 | 293 |
| 射胶重量(PS) | Shot weight (PS) | oz | 6.6 | 8.2 | 10.3 |
| 螺杆行程 | Screw stroke | mm | 200 | ||
| 射胶压力 | Injection pressure | Mpa | 215 | 174 | 137 |
| 理论射胶速率 | Injection rate | g/s | 99 | 123 | 155 |
| 最大螺杆转速 | Max. screw speed | rpm | 270 | ||
| 锁模系统 Clamping Unit | |||||
| 锁模力 | Clamping force | KN | 1300 | ||
| 移模行程 | Toggle stroke | mm | 360 | ||
| 拉杆间距 (H*V) | Space between tie bars | mm | 420*380 | ||
| 最小模厚 | Min.mold thickness | mm | 150 | ||
| 最大模厚 | Max.mold thickness | mm | 430 | ||
| 顶出行程 | Hydraulic ejection stroke | mm | 120 | ||
| 顶出力 | Hydraulic ejection force | KN | 40 | ||
| 其他 Others | |||||
| 油压系统压力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵马达功率 | Pump motor | kw | 13/15.3 | ||
| 电热量 | Heating capacity | kw | 6.3 | ||
| 邮箱容量 | Oil tank capacity | L | 190 | ||
| 外形尺寸 | Machine dimensions | m | 4.8*1.2*1.9 | ||
| 理论机重 | Machine weight | Tom | 3.8 | ||
- CN